Also der Kopf passt eigentlich, wo du das problem hast ist der Zahnriemen, da du keinen passenden von Daihatsu bekommst. Der Block ist nämlich kürzer als der vom CB80 und deswegen passt der Riemen nicht.
Hier gehts zwar um einen CB23 Block mit CB80 Kopf...
UPS.
Zitat:
|
Zitat von rafaelmalo
i have a 91 charade GTti with cb 80 engine, the engine is very old and broken piston, i don´t have spare parts in america to rebuild this engine, in my country there are many charade cb23 engine, can i use a cb23 block with cb 80 head? (low pressure max 10 psi)
|
Zitat:
|
Zitat von rafaelmalo
no, i change a complete block from a cb23 engine internals included, is only 4 mm under.
 |
Zitat:
|
Zitat von rafaelmalo
the problem is the pistons are broken..... i have to use cb23 block for this reason, i will use low bost only 10 psi.....
|
Zitat:
|
Zitat von rafaelmalo
no, i change a complete block from a cb23 engine internals included, is only 4 mm under.
|
Zitat:
|
Zitat von rafaelmalo
the cb23 and the cb 80 block are very similar, the cb 80 internaly is stronger than cb 23 but externaly are almost the same, the only diference is the cb 23 block is 4mm shorter in high,and i had to cut the timing belt cover, the rest is the same: gear box , head, and all parts fit perfectly.
you must use a 153 or 154 teeth timing belt, gtti use a 155 teeth.
bye.
sorry by my english.
|
Zitat:
|
Zitat von rafaelmalo
i use a KIA SEPHIA model timming belt, but you can use any belt whit 154 teets and same profile, just ask for it in other car models.
|
Einzig interessant der typ stellt selbst die frage und beantwortet sie auch selbst
Nachzulesen (Registrierung NOTWENDIG) hier:
http://www.daiclub.com/index.php?opt...91&topic=569.0