Daihatsu-Forum.de  

Zurück   Daihatsu-Forum.de > Technik und Tuning > Die Materia Serie

Die Materia Serie (M400, M402)

Antwort
 
Themen-Optionen
Alt 03.06.2009, 11:30   #11
smateriato
Benutzer
 
Registriert seit: 13.02.2009
Ort: Italy
Alter: 59
Beiträge: 52
Themenstarter
Standard

Ich das Problem gefunden.
Die Federn sind zu kurz.
Ich habe versucht, die Aufhebung der Front. Federn vollständig unverpackt bewegen (Ausführen a little 'rechts und links).
Ich muß eine dicke?

I found the problem.
The springs are too short.
I tried to lift the front. Springs fully unpacked moving (running a little 'right and left).
I must put a thick?
smateriato ist offline   Mit Zitat antworten
Alt 03.06.2009, 22:30   #12
Sonny06011983
Vielposter
 
Benutzerbild von Sonny06011983
 
Registriert seit: 28.01.2009
Ort: Lüchow, Wendland
Alter: 41
Beiträge: 2.488
Standard

What's a thick? Is is something like a spacer?

Maybe it would help. But normally, even lowered springs should be that long that they fit tight while the wheel is in the air. They should'nt wobble like you wrote.

Are the springs you bought specially designed for the Materia & are they legal?
__________________
Es grüßt Euch
Sven
Sonny06011983 ist offline   Mit Zitat antworten
Alt 04.06.2009, 00:59   #13
smateriato
Benutzer
 
Registriert seit: 13.02.2009
Ort: Italy
Alter: 59
Beiträge: 52
Themenstarter
Standard

Yes, a spacer just to compress a little bit the spring, to avoid the whobble. Springs are fully uncompressed when the wheel is in the air and this is not a good thing.
But there is a good news. If I turn the spring fully clockwise, the whobble is reduced.
Another thing: I think to have found that my Materia is lower on the left side. Just a few millimeters, so I think to swap left and right springs. I will take this opportunity also to double check the plates and fixing bolts/nuts.
smateriato ist offline   Mit Zitat antworten
Alt 04.06.2009, 20:20   #14
smateriato
Benutzer
 
Registriert seit: 13.02.2009
Ort: Italy
Alter: 59
Beiträge: 52
Themenstarter
Standard

Ich habe nicht das Gummi auf der ursprünglichen Federn, am Ende der vorderen Spule und auch in der Mitte der hinteren Spule.
Jetzt habe ich das Gummi und es gibt weniger "clank", die auch auf der Rückseite.
Noch einige "clunk" auf der Vorderseite.

I didn't see the rubber on the original springs, at the end of the front coil and also in the middle of the rear coil.
Now I have this rubber and there are less "clank", also on the rear.
Remain some "clunk" on the front.
smateriato ist offline   Mit Zitat antworten
Antwort

Themen-Optionen

Forumregeln
Es ist Ihnen nicht erlaubt, neue Themen zu verfassen.
Es ist Ihnen nicht erlaubt, auf Beiträge zu antworten.
Es ist Ihnen nicht erlaubt, Anhänge hochzuladen.
Es ist Ihnen nicht erlaubt, Ihre Beiträge zu bearbeiten.

BB-Code ist an.
Smileys sind an.
[IMG] Code ist an.
HTML-Code ist aus.

Gehe zu

Ähnliche Themen
Thema Autor Forum Antworten Letzter Beitrag
H&R Gewindefahwerk lieferbar!! Applause-limited Die Materia Serie 31 19.04.2008 17:05


Alle Zeitangaben in WEZ +2. Es ist jetzt 12:12 Uhr.


Powered by vBulletin® Version 3.8.4 (Deutsch)
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Template-Modifikationen durch TMS